ATK301: Extension Spring 31.8

Extension Spring Length 31.8, Diameter 9.5, Wire diam 1.42, Max Len 42.28, Initial Tension 10.5N, Tension 6.98N

  • Manufacturer: Various
  • Product ID: AM 3310 (Flexospring version)

A 31.8mm long extension spring used in the Spitfire flight stick for the roll spring.

Supplier Links

https://www.flexosprings.com/search-products?sku=am3310

Indicative Pricing With Allowance for P&P

Springs are probably the most difficult and expensive things to source. This is a stock spring available from many different manufacturers (see below on what aspects are critical) and although they are not expensive you’ll probably get hit hard for P&P.

£9.50

Substitutions

Although these are commodity items you may struggle to find an exact duplicate unless you buy from flexospring. If you want to vary any of these dimensions these are the consequences.

  • Length 31.8mm – Do not go any longer. You could maybe go shorter by 1 – 2 mm
  • Diameter 9.5mm – Do not go any wider. You could go narrower by 0.5mm
  • Wire diameter 1.42mm – Not so critical but if massively affects the tension
  • Max length 42.28mm – Longer is fine, shorter is less fine as you’ll overstretch it but you may well get away with that on the few occasions you go max roll.
  • Tension 6.98Newtons per mm – Any less and the roll action will feel very week. Any more and you’ll stress the design more than I have tested it to. If you’re feeling brave try a stronger one

ATK404: MR52 Bearing

MR52ZZ Deep Groove Ball Bearing 2x5x2.5mm Double Shielded

  • Manufacturer: Various
  • Product ID: MR52ZZ

These bearings are sooo tiny! They are used in the mClick component used by flaps levers and other multi-posittion levers.

Supplier Links

https://www.amazon.co.uk/gp/product/B07TKWK9D2/

Indicative Pricing With Allowance for P&P

I’ve seen these on eBay for £2.50 individually but you will get a better deal buying a pack of 10.

£2.50

Substitutions

There is an MR52-2RS version that can also be used but they are much harder to find and more expensive.

ATK403: 6700 Bearing

6700ZZ Steel Thin Wall Section Ball Bearing Deep Groove Double Shield 10mm x 15mm x 4mm

  • Manufacturer: Various
  • Product ID: 6700ZZ

A small bearing used by the Spitfire brake lever. It’s pretty much the smallest bearing you can fit a 5mm3 cubed magnet inside.

Supplier Links

https://www.amazon.co.uk/6700ZZ-Section-Bearing-Groove-Double/dp/B078NW3XRC

Indicative Pricing With Allowance for P&P

These can be expensive individually, but if you buy a few you can get them for about £2 or a little less

£2

Substitutions

The dimensions are critical but the ZZ steel format isn’t. A 6700-2RS will also work.

ATK402: 6803 Bearing

6803-2RS Deep Groove Ball Bearing 17x26x5mm Double Sealed

  • Manufacturer: Various
  • Product ID: 6803-2RS

A medium sized bearing used for AuthentiKit throttle quadrant designs.

Supplier Links

https://www.amazon.co.uk/sourcing-map-6803-2RS-17x26x5mm-Bearings/dp/B07TRQ1Q7S

Indicative Pricing With Allowance for P&P

These can be expensive individually, but if you buy a few you can get them for about £2 or a little less

£2

Substitutions

The dimensions are critical but the rubber seal isn’t. A 6803Z will also work.

ATK401: 6003 Bearing

6003-2RS Ball Bearings (17x35x10mm) Double Rubber Black Seal Bearing

  • Manufacturer: Various
  • Product ID: 6003-2RS

A very strong bearing (used in washing machines!) used in many AuthentiKit parts such as trim wheels and the Spitfire flight stick.

Supplier Links

https://www.amazon.co.uk/sourcingmap-6003-2RS-Groove-Bearing-Double/dp/B07FDYGH4R/ref=sr_1_4

Indicative Pricing With Allowance for P&P

These can be expensive individually, but if you buy a few you can get them for about £2 or a little less

£2

Substitutions

The dimensions are critical but the rubber seal isn’t. A 6003-2Z will also work.

ATK205: 12×12 Tact switch (flat)

Yellow Plunger Tactile Switch, SPST-NO 50 mA @ 24 V dc 3mm

  • Manufacturer: Omron
  • Product ID: B3F-4005

There are loads of manufacturers of 12mm x 12mm tact switches however AuthentiKit designs are all based around the Omron B3F series, This is the flat type as opposed to ATK204 which is the projected button type. Total height 4.3mm, with lugs at the bottom.

Supplier Links

https://uk.rs-online.com/web/p/tactile-switches/6866869/

Indicative Pricing With Allowance for P&P

RS Online only sell in minimums of 5 but you can get them individually on Amazon/Ebay with free postage.

£1.60

Substitutions

I would stick to Omron. The dimensions and shape need to be exactly the same. Still there are other variants that will work – for example it doesn’t matter what the operating force is or whether you go for fancy gold plated options. Here’s a link to the manufacturer specs.

https://docs.rs-online.com/5010/0900766b80dbe05c.pdf

ATK204: 12×12 Tact switch (projected)

Yellow Plunger Tactile Switch, SPST-NO 50 mA @ 24 V dc 3mm

  • Manufacturer: Omron
  • Product ID: B3F-4055

There are loads of manufacturers of 12mm x 12mm tact switches however AuthentiKit designs are all based around the Omron B3F series, This is the projected type with a small post that sticks up as opposed to ATK205 which is the flat button type. Total height 7.3mm, with lugs at the bottom.

Supplier Links

https://uk.rs-online.com/web/p/tactile-switches/6866777/

Indicative Pricing With Allowance for P&P

RS Online only sell in minimums of 5 but you can get them individually on Amazon/Ebay with free postage.

£1.60

Substitutions

I would stick to Omron. The dimensions and shape need to be exactly the same. Still there are other variants that will work – for example it doesn’t matter what the operating force is or whether you go for fancy gold plated options. Here’s a link to the manufacturer specs.

https://docs.rs-online.com/5010/0900766b80dbe05c.pdf

ATK202: Hall sensor

A1324LUA-T Hall Effect Sensor, Linear, 10 mA, SIP, 3 Pins, 4.5 V, 5.5 V

  • Manufacturer: Allegro Microsystems
  • Product ID: A1324LUA-T

I tested about four hall sensors and this was best for the way we’re using it here. I recall it was the strongest in terms of response to the magnetic field.

NB: These Allegro sensors are in very short supply at the moment. See substitution options below.

Supplier Links

https://uk.farnell.com/allegro-microsystems/a1324lua-t/hall-effect-sensor-linear-sip/dp/2840983

Indicative Pricing With Allowance for P&P

Farnell has them at £2.33 if bought individually. With allowance for some P&P I’ve gone for £3

Substitutions

Other options from Allegro may work however they often have a much weaker response than the 5mv/G that the Allegro gives. This means that your axis movements will be less precise especially at the ends of travel. I have researched an alternative from Honeywell and found it to be an acceptable alternative. The Honeywell SS494B has an equally good response curve through the range of movement and is an exact match physically. If you can get the Allegro version I still recommend it though as the Honeywell proved to be more jittery. The allegro had jitter of around 0.1% and the Honeywell around 0.2%.

ATK201 – RJ45 Keystone Jack

RJ45 CAT6/CAT5e Tool-Less No Punch Down Tool Required Gold Plated 10 GB Ethernet Cable Patch Panel Wall Plate

  • Manufacturer: iGreely (other brands offer the same e.g. Antrader, Setko)
  • Product ID: The iGreely version shows T568A/B

After testing many different types of keystone jack this one proved the best and easiest for to reliably connect with tools and all AuthentiKit designs are built around it’s specific dimensions. It’s a tool-less keystone jack and this particular one is recommended.

Supplier Links

https://www.amazon.com/gp/product/B07JW7F9XG/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Indicative Pricing With Allowance for P&P

They are hard to buy individually. Amazon.Com has them at $11 for 10, so I’ve suggested £2.50 each as a compromise.

Substitutions

Other options to iGreely will work, but you need to ensure that the wiring order is the same 12548736 and the same profile/dimensions.

ATK1C306 M3 Countersunk Screw x 6mm

M3 Countersunk phillips head machine screw 6mm long

  • Manufacturer: Various
  • Product ID: Various

Use either zinc plated or stainless steel. Get philips head if you can as the PH1 but fits them very nicely, otherwise pozidrive will do.

Technical Details

Diameter of head: 5.6mm

Supplier Links

https://www.ebay.co.uk/itm/252499986301

Indicative Pricing With Allowance for P&P

You will always buy these in a pack rather than individually. Buying 10 or 20 is often virtually an identical price to buying 5. So, based on buying 20 the unit price is about £0.20

£0.20

Substitutions

Pozidrive is an option if you can’t get phillips head.